2020 SANY SAC2200T Used Hydraulische Kranen te koop2020 SANY SAC2200T Used Hydraulische Kranen te koop
    2020 SANY SAC2200T Used Hydraulische Kranen te koop2020 SANY SAC2200T Used Hydraulische Kranen te koop
    2020 SANY SAC2200T Used Hydraulische Kranen te koop2020 SANY SAC2200T Used Hydraulische Kranen te koop
    2020 SANY SAC2200T Used Hydraulische Kranen te koop2020 SANY SAC2200T Used Hydraulische Kranen te koop
    Foto's(4)

    2020 SANY SAC2200T

    Hydraulische Kranen
    € 239.133 
    Prijs ingevoerd als: USD $276,000

    Everglory International Group Co.,ltd

    Contactpersoon:Bonnie Yan

    SHANGHAI, China

    Algemeen

    Jaar
    2020
    Fabrikant
    SANY
    Model
    SAC2200T
    Boven uren
    600
    Conditie
    Gebruikt
    Omschrijving
    Sany Original painting all this terrain crane 220T (SAC2200T) Year of manufacture: 2020 Main boom length: 76m Jib length : 21m Counterweight:76.5T 1. Core Lifting Performance Maximum Rated Lifting Capacity: 220 t (at 3 m minimum radius, basic boom) Maximum Lifting Moment (Basic Boom): 6664–7271 kN·m Maximum Lifting Moment (Full-extended Boom): 3190–3540 kN·m Minimum Rated Working Radius: 3 m Maximum Working Radius (Full-extended Boom): 70 m Rated Capacity at Full-boom Tip: ~2.5–2.8 t (at 73–75.5 m main boom length) 2. Boom & Jib System Boom Type: 7-section, U-shaped high-strength steel telescopic boom Basic Boom Length: 13.8–14.1 m Full-extended Main Boom Length: 73–75.5 m Maximum Combination Length (Boom + Jib): 92.6–106.6 m (standard) / Up to 107 m (optional) Auxiliary Jib Length: 16–43 m (depending on configuration) Jib Luffing Angles: 0°, 20°, 40° Maximum Lifting Height (Main Boom Only): 76 m (full extension) Maximum Lifting Height (Boom + Jib): 93–107 m 3. Dimensions & Vehicle Body Overall Length:15.53–16.43m Overall Width:2.995–3.00m Overall Height:4.0 m Load Capacity (Max Lifting) 220000kg Net Weight (Operating Weight):54670–60000kg Gross Weight (Max Total Mass):54800–60000kg Counterweight (Total):76500kg 4. Travel & Chassis Drive Configuration: 10×8×10 (5-axle, all-wheel steer) Maximum Travel Speed: 80 km/h Minimum Turning Radius: 9.5–10 m Minimum Ground Clearance: 270–325 mm Approach/Departure Angle: 16–20° / 12–17° Maximum Gradeability: 45–58% Fuel Tank Capacity: 500 L Axle Load (Front/Rear): 10.45–12 t / 10.4–11.6 t 5. Work & Operation Speed Main Winch Line Speed (No Load): 130 m/min Main Winch Line Speed (Full Load): 45 m/min Auxiliary Winch Line Speed (No Load): 130 m/min Auxiliary Winch Line Speed (Full Load): 45 m/min Maximum Slewing Speed: 1.5–2.0 r/min Boom Telescoping Time (Full Ext/Ret): 660 s Boom Luffing Time (0° to 80°): 60–90 s 6. Stability & Outriggers Outrigger Span (Long × Trans): 8.3–9.46 m × 8.5–9.045 m Tail Swing Radius: 4.85–4.86 m Total Counterweight: 76.5 t (76500 kg) 8. Environmental & Safety Operating Temperature Range: -20 °C to +40 °C Safety System: Load Moment Limiter (LMI, ±3% accuracy), overload alarm, emergency stop, anti-slip protection Hydraulic Protection: Load-sensing constant-power system with balance valves & anti-cavitation controls

    capaciteiten

    Hefvermogen
    220 t

    Categorie specifiek

    Giek lengte
    76 m
    Jib Length (Max)
    21 m
    Maximale giek- en jiblengte
    111 m
    Maximale hefhoogte
    111 m
    Aantal stempels
    4
    Counterweight
    76,5 t
    Aantal draagassen
    5